I have a CR-10 that im using currently and a prusa i3 that i don't use anymore. The thing i like about the CR-10 is the build volume. Making armor we usually need to print large things and a larger build volume means less seems. Speaking from experience because I made my mark 46 entirely on the prusa i3 and there was a lot of pla welding. Something I dont like about the CR-10 is how loud it is. I installed vibration dampers on it and the thing is still keeping me up at night.
![](https://static.wixstatic.com/media/a27d24_b7ce4abfaa814c21abbf69362bd22306~mv2.jpg/v1/fill/w_147,h_121,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/a27d24_b7ce4abfaa814c21abbf69362bd22306~mv2.jpg)
![](https://static.wixstatic.com/media/a27d24_8e4da1ec2ea24b60911ab19f134b2946~mv2.jpg/v1/fill/w_116,h_116,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/a27d24_8e4da1ec2ea24b60911ab19f134b2946~mv2.jpg)
I made this suit with the prusa i3
![](https://static.wixstatic.com/media/a27d24_cfc44b13ed334ac2a28a22ee737f59d6~mv2.jpg/v1/fill/w_147,h_184,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/a27d24_cfc44b13ed334ac2a28a22ee737f59d6~mv2.jpg)
![](https://static.wixstatic.com/media/a27d24_b9c75c9c41e6403e9679c7ca9b4382f7~mv2.jpg/v1/fill/w_147,h_147,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/a27d24_b9c75c9c41e6403e9679c7ca9b4382f7~mv2.jpg)
![](https://static.wixstatic.com/media/a27d24_be3d98402243446496d97893379f92d5~mv2.jpg/v1/fill/w_147,h_147,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/a27d24_be3d98402243446496d97893379f92d5~mv2.jpg)
![](https://static.wixstatic.com/media/a27d24_79af8d520e3f4b33ab6bcfa8b4453836~mv2.jpg/v1/fill/w_147,h_184,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/a27d24_79af8d520e3f4b33ab6bcfa8b4453836~mv2.jpg)
And these projects were made
with the CR-10