Free 3D Printable Model: Iron Man Mark XXXIX Gemini (MK 39) Full Body Armor File from Do3D

شيخ روحاني 00491634511222

شيخ روحاني

رقم شيخ روحاني

شيخ روحاني في برلين

الشيخ الروحاني

جلب الحبيب خلال ساعة جلب الحبيب مجرب وصحيح

جلب الحبيب بالسحر الأبيض دعاء لجلب الحبيب دعاء لجلب الحبيب جلب الحبيب بسرعة دعاء لجلب الحبيب

BerlinintimHobbyhuren aus berlinBerlinnuttenNutten in berlinBerlin sexkontakteKaufmich berlinSexkontakte in berlinSextreffen berlinBerlin intimEscort Berlin

Hobbynutten Berlin Kaufmich Escort in Berlin Billige Nutten Berlin

شيخ روحاني 00491634511222

AO Sex Berlin

berlin intim escort

BERLINintim

Berlinintim

Huren Berlin

Berlinintim

Unknown member

Jun 4

Backlink

شيخ روحاني

شيخ روحاني 00491634511222

شيخ روحاني

رقم شيخ روحاني

شيخ روحاني في برلين

الشيخ الروحاني

جلب الحبيب خلال ساعة جلب الحبيب مجرب وصحيح

جلب الحبيب بالسحر الأبيض دعاء لجلب الحبيب دعاء لجلب الحبيب جلب الحبيب بسرعة دعاء لجلب الحبيب

BerlinintimHobbyhuren aus berlinBerlinnuttenNutten in berlinBerlin sexkontakteKaufmich berlinSexkontakte in berlinSextreffen berlinBerlin intimEscort Berlin

Hobbynutten Berlin Kaufmich Escort in Berlin Billige Nutten Berlin

شيخ روحاني 00491634511222

AO Sex Berlin

berlin intim escort

BERLINintim

Berlinintim

Huren Berlin

Berlinintim

Unknown member

Apr 27

Finding HHCP For Sale online can feel overwhelming with so many choices. Stick to brands that post transparent lab testing and have strong customer reviews. Good HHCP products should offer potency, flavor, and smoothness in every puff or drop.

Unknown member

Dec 24, 2024

Hola saludos a todos, descargue este modelo para imprimir soy novato en el tema, note que solo trae un guante de la mano como se hace para obtener el faltante?

Unknown member

Apr 14, 2024

has anyone motorized the helmet and if so i desperately need help please send advice

Unknown member

Nov 12, 2023

No puedo descargar el trage o tengo que comprarlo o ser socio!?

Unknown member

Sep 23, 2023

gone through the procces of aquiring these files but as of yet not recieved them ill check back in another hour

David Morgan

Nov 12, 2023

Replying to

Did you ever get this sorted out, as I am in the same boat as you?

Unknown member

Jun 19, 2023

What size magnets does the plain helmet use

Unknown member

Apr 14, 2024

Replying to

2 x 8 magnets

Unknown member

Jan 17, 2023

Why have I not received the files ?

Jordan Ray

Dec 4, 2021

so excited to get started on this. its gonna be my practice suit build to prepare me for the mk 85 build

yessika tatiana vargas rivas

Aug 13, 2021

oh por dios! mega genios

neptunefox

Jul 28, 2021

Why i cant download the files?

D3x

Jul 13, 2021

Does anyone know the name of that color on the main part of the suit?

Omar Mirza

Jun 22, 2021

Thank you Do3D. You guys rock!

mo warren

Apr 1, 2021

Thank you so much for this free files iam look forward to printing this on my new printer CR-10 Max

Mason White

Mar 31, 2021

Do the honeycomb design come with the file Do3D?

Mason White

Mar 31, 2021

OMG THIS IS AMAZING!!!

jaycollins76

Mar 31, 2021

Is this able to be made to wear ? And if so for someone who’s a size 3xl???

Mar 9, 2021

Start with the helmet to get a good feel for the whole suit

Wayne Little

Mar 8, 2021

absolute noob here saw franky_builds on tiktok and he inspired me to get a 3d printer after a lot of looking around I decided on a ender 3 and I managed to pick up a second hand one for 150 it has a bltouch and a touch screen so to my point of this post would i be able to print this as a noob on a ender 3 and how would I make it smaller to fit a child

Mar 8, 2021

Replying to

@Wayne Little there's quite a few videos on YouTube on scaling, and download meshmixer to cut the pieces to fit the printer, there's also videos on how to use meshmixer on YouTube. it's pretty simple to use

Mar 8, 2021

Replying to

Wayne Little

Mar 9, 2021

Replying to

@Duane Ward thank you for your reply I will watch some more you tube and may be play a little more before I jump stright in the deep end on a massive build

currently printing a few psa holders and top loader holders at the

swhitfield1314

Feb 24, 2021

maybe I'm missing it but I don't see the lower back piece??

Jonathan Lobón

Feb 20, 2021

Thanks a lot!!!!!!

Jessica Jones

Feb 19, 2021

This is a really decent site post. Not very numerous individuals would really, the way you simply did. I am truly inspired that there is such a great amount of data about this subject have been revealed and you've put Yellowstone Men's Clothing forth a valiant effort, with so much class. On the off chance that needed to know more about green smoke surveys, than by all methods come in and check our stuff.

fant_gant

Jan 29, 2021

Thanks You So much...

DUMONT Lionel

Jan 14, 2021

Good work perfect

David McKAY

Jan 5, 2021

will this print on a ender 5 size? thanks in advanced.

David McKAY

Jan 5, 2021

Replying to

its okay, i read previous comments. thanks again.

Junior Mero

Jan 3, 2021

Junior Mero

Jan 3, 2021

No puedo descargarlo me ayudan por favor

Dec 24, 2020

i'm getting stuck into mine now, here's a couple of pieces I've completed

William Johns

Jan 4, 2021

Replying to

Am I just blind, I couldn’t find the glove in the file? Did you just use a different one or is it actually in there?

Alan Parry

Jan 4, 2021

Replying to

https://www.do3d.com/forum/free-3d-print-model-list/free-3d-printable-model-high-poly-iron-man-hand-glove-compatible-with-mark-ii-mark-xlv-mk-2-mk-45-file-format-stl-no-hinges

Andy Wilson

Dec 20, 2020

hi, i'm newbie and i am so facinated of your project. I saw your post is free model but only for selected member, so how can i be one of the selected one ?

Richard Tweed

Dec 14, 2020

this is crazy good, how do i dowload the files?

Ingo Wester

Dec 3, 2020

How large is it ? Im only 1.70cm tall

Dec 24, 2020

Replying to

What ever size you want it to be, just scale it to fit

Ingo Wester

Dec 3, 2020

I Need a bigger Printer..some Parts are larger than 420mm

Dec 24, 2020

Replying to

Download meshmixer and you can cut the pieces to fit your printer

offgridprofessor

Nov 26, 2020

What is the height of the base model or the human form that fits this armor at 100%? Im 6'1 and 220lbs.

How much should i scale up.

Ive seen this on youtube they guy looks 5'8"

Nov 27, 2020

Replying to

I'm 6 foot tall bang on, and I found the top of the legs still need trimmed a little bit, so yo will fit perfectly.

William Johns

Nov 25, 2020

I'm kinda new to 3d printing, what type of material should I use for the flexible prints? Also, is there a guide for how to connect everything?

renaud.paris13

Oct 15, 2020

thanks a lot 😁

Bruno Ibanez

Oct 10, 2020

Love it.... thank you

Sep 19, 2020

O.k, I have completed my starboost full body suit, it is now fully wearable, I have put an updated video on my YouTube channel... oracle's cave.

The suit is now being offered for swap for filament, P.L.A plus, so if you are genuinely interested in making an offer you can get in touch.

Any questions you have feel free to ask away.

Thanks to do3d for this opportunity, crazy cool project.

donaldalviar128

Sep 12, 2020

What kind of printer do you use

endorsurvivor

Sep 8, 2020

This is amazing! Thank you for sharing this for free!

Sep 8, 2020

Replying to

I have already completely made the suit and is wearable, absolutely awesome, my suit still has to be painted but I have completely run out of space and have to part with my suit.

So I am offering my suit for swap for filament, if anyone is interested you should get in touch through my YouTube channel... Oracle's Cave

I know I am not allowed to sell it for cash as I do not own the rights, so swap for filament only and you will need to take care of the shipping, it's around the 15kg mark.

It used 17kg of filament to make and a couple thousand hours, so if you wish to make an offer to swap. Go ahead and you might just have the rarest full body robot suit for cosplay, Halloween or to use as a performer, and many more uses.

I have some people interested and it is also advertised locally, so if you are considering it, get in touch A.S.A.P

COD PIECE AND FULL FRONT HELD IN PLACE WITH MAGNETS, AND I WILL GET AN UPDATED VIDEO ON MY CHANNEL SHOWING EVERTHING UP CLOSE AND ALL PIECES.

Aug 29, 2020

Right guys here it goes...

I nearly gave up on the suit the other day, even posted a video trying to get rid of it.

But straight after posting the video, I was made aware I had at least 3 days to myself, I decided to just get the suit completed and fully wearable, that's when I found the issue.

At the lowest part of the ABS muscles area and BETWEEN the ABS and COD PIECE, there is a part missing and it leaves a big void.

On closer inspection of the graphic art images, there should be an extra part in that area that is GOLD, likewise I also found another area at the LOWER BICEPS, where the biceps meet the TPU ELBOW part, which happens to also be gold on the graphic art pictures.

I'm not to bothered about the biceps part but the ABS codpiece part leaves a bad wide open area.

Can you get back to me and let me know if you have the part, or if it will be released.

Much appreciated

MH Creative Grain

Aug 26, 2020

Printed the legs only to discover that that thigh is absurdly long. Shin is perfect, but the thigh is drastically exaggerated. If I scale it down overall, the knee will not fit correctly, if I reprint the knee along with it, it will no longer fit the lower knee. If I "squish" it down in size, the hex pattern will distort. Anyone have any suggestions on how to make this feasible?

Juan Carlos Chaparro Pesca

Aug 29, 2020

Replying to

@MH Creative Grain trim around the top of the thigh as it's going to come up too high anyway.

My legs are huge, and I printed my body section at 110% scale lol, but just got 1 more hip pod to remake at 110% scale and I'm completely done.

I did find I needed to break off parts from the lower thigh aswell for it to fit onto the knee cap.

My suit stands at nearly 6ft lol that's without neck and helmet.

Aug 24, 2020

Thanks Man

Marcelo Claure La Fuente

Jul 30, 2020

Mil Gracias por esta contribución y sigan adelante

Marcelo Claure La Fuente

Jul 30, 2020

Me encanto los detalles. felicidades por su trabajo

KingFrogs Revenge

Jul 4, 2020

just wondering if there would be any problem if i make a youtube video/series of the journey of printing and building this suit

Jul 4, 2020

Replying to

That would be great! We are encouraging you to do do so! Thank you.

jacksonir

Jul 4, 2020

Is it me? I go to the forum download page and cannot find the full suit files either in one place or in parts

Impresiones 3D Guadalajara

Jul 4, 2020

Replying to

All links are located at https://www.do3d.com/forum/downloads-members-only/mk-39-lower-body-pack-and-cut-up-chest-for-smaller-printers. Thank you.

Javier Torres

Jun 30, 2020

Es de los mejores trabajos que he visto, te superas cada vez mas, eres un maquina!!! me gustaria poder imprimirla a ver como me sale :D

Jun 28, 2020

no tendreis una imagen para ver como va montada luego la armadura verdad? vendria de gran ayuda

gracias, buen trabajo

Jun 27, 2020

The missing textured pieces for the forearm can be downloaded 👉👉👉 here.

Duncan Chivers

Jun 27, 2020

Replying to

Fantastic! Thanks Chaps

Jun 27, 2020

Replying to

Nice job guys, that's a wicked pardon, much appreciated.

Jun 21, 2020

On my files, the shoe accessories is just 3 circles to glue onto the shoe, no files for large missing section under the front of

Jun 21, 2020

Replying to

I would download again. the folder should have 8 files 4 per foot

Jun 22, 2020

Replying to

Yeah I downloaded again and now have the file and updated COD piece so thanks for that heads up, just finishing the other shoe so perfect timing.

Much appreciated dude.

Jun 21, 2020

and I have printed the boot and foot but missing the front lower part of shoes, there is no file that I can see that are these parts.

Jun 21, 2020

Replying to

The shoe looks to be made up of 4 files, one being the accessories. The front lower section, Front mk39 joins with shoe main. creating the front portion of the shoe.

fireknifedx

Jun 21, 2020

Awesome work thank you very much. I was wondering if the forearms could be fixed its missing the texture on the wrists that go to the top of the hand

davy vlaeminck

Jun 17, 2020

busy printing it. Thx again for the files. Cannot find the gloves files though.

Prints look awesome and will be posting pics soon.

Alan Parry

Jun 21, 2020

Replying to

Download these gloves

https://www.do3d.com/forum/free-3d-print-model-list/free-3d-printable-model-high-poly-iron-man-hand-glove-compatible-with-mark-ii-mark-xlv-mk-2-mk-45-file-format-stl-no-hinges

darchangeldavid

Jun 5, 2020

Wow you are giving this one away! I've wanted to build this armor forever! Thanks.

Jordan Crisp

Jun 1, 2020

thank you

Jun 1, 2020

So can not wait to complete this, it looks epic. Well done and thank you to all involved

Kostas Pontikos

May 28, 2020

You are the best guys!!!!Thank you so much!!!I hope you give more free files in the future🙂🙂

May 27, 2020

Cod piece has been added and the thigh textured pieces have been separated now. Download from https://www.do3d.com/forum/downloads-members-only/mk-39-lower-body-pack-and-cut-up-chest-for-smaller-printers

Thank you!

Zelyanin Konstantin

May 25, 2020

Вы просто супер. Давно слежу за вашей работой. Специально пишу на русском, чтобы показать насколько большое у вас комьюнити ))

chris bradley

May 25, 2020

thank you

steve.taylor007

May 25, 2020

amazing work, thank you

Jimmy Peñaherrera S.

May 24, 2020

WOW!!! Muchas Gracias, se reconoce que detrás de un simple link de descarga hay horas y horas de trabajo. Bendiciones

Mark Tuttle

May 24, 2020

This is awesome. Much appreciated.

me.auro

May 24, 2020

Grazie, I vostri file sono i migliori!!

Richard Rodriguez

May 24, 2020

As promised! Beautiful work.

syl

May 24, 2020

Awesome !! Thanks a lot !! You are the best !!

May 24, 2020

Lower body set available https://www.do3d.com/forum/downloads-members-only

We also separated the chest piece into smaller shells for smaller printers.

Thank you! - Team Do3D

chris bradley

May 21, 2020

love your work

Aditya Dhanraj

May 15, 2020

And thank you for the upper body Armor file 😊

May 15, 2020

Replying to

You're welcome. Happy printing!

Aditya Dhanraj

May 15, 2020

Can you please tell me in which dat you will upload the lower body Armor file

May 15, 2020

Replying to

It will be released next weekend. You can start printing the upper body files first. Thank you.

May 15, 2020

Downloaded and looking forward to getting this made!

May 15, 2020

Replying to

Can't wait! Thanks for downloading!

bpark0929

May 14, 2020

That's amazing!

May 15, 2020

Replying to

Thank you!

Mateusz Sikora

May 10, 2020

uh oh ah... when this will come !!! Kiedy to się pojawi !!!! Nie mogę się doczekać !!! I can not wait!!!

sebastien dijoud

May 10, 2020

very merveillous ! i love

Cmccost Cost

May 10, 2020

Genios!!! como dige antes es hermoso este modelo.lo espero muchísimas Gracias.😀

Mario Krause

May 10, 2020

Hallo super schöner Anzug., Gibt es den noch zum download for free ?

M.H.Art Studio

May 10, 2020

Where is the download link?

locke homan

May 10, 2020

Sweet thankyou very much

locke homan

May 10, 2020

Anyone got tips for scaling i made the helmet and it was a tad small trying to scale

May 10, 2020

Replying to

There's a link on it in the tips and tricks part on here

josenavas9

May 10, 2020

I do nothing but look but it's not ... tic tac tic tac

Stephen Jesse

May 10, 2020

The week is almost over so we should be seeing the model momentarily

CaseHD Art

May 10, 2020

show

Ryu Cosplayz

May 7, 2020

i was printed this helmet, now we can wait for this armor

thanks do3d

Paul Brady

May 6, 2020

when this comes available can i ask what the size will fit ? without scaling please

May 6, 2020

Replying to

Our model is set for 6 feet (182.88 cm) by default but you can follow scaling tips at https://www.do3d.com/forum/3d-printing-tips-tricks

Ryu Cosplayz

May 6, 2020

i was printed mk39 helmet, awesome this 3d file from do3d

May 6, 2020

Replying to

@Ryu Cosplayz Please post some photos at https://www.do3d.com/forum/work-in-progress-wip show us some results :)

Kito A

May 5, 2020

Beautiful work!

frank.rozsas

May 5, 2020

Thanks, cant wait!.

Ariel Sánchez Arancibia

May 4, 2020

good work!

Jack Midgley

May 4, 2020

Some time within the week

H&R Productions RVA

May 4, 2020

Any idea how soon? Days, months? Year?

ARMAD Designs

May 4, 2020

How will the Backpack Jet be assembled? Very excited for the release.

syl

May 4, 2020

Awesome !! Thank you so much !!

josenavas9

May 4, 2020

ok. Thank.

josenavas9

May 4, 2020

wow...I can not wait ... thank you very much for this contribution Do3D ...

do you know when it is published?

May 4, 2020

Replying to

@josenavas9 It will be published this week. Thank you.

Duncan Chivers

May 9, 2020

Replying to

@Do3D Still this week? 😬

Stephen Jesse

May 4, 2020

I can't believe that you are willing to give this away for free it looks fantastic. Can't wait to see it.

Francisco Vargas Loor

May 3, 2020

great, how do i download?