Thank you very much for your patience. We wanted to give you the file as soon as possible so we are sharing the first half of the full armor first. The rest will be released in 2 weeks so you will receive it before you finish the upper body and helmet which we already shared earlier.
Download link is HERE.
Please do not share or sell this file. We are allowing you to use the file under the following Creative Commons license below. Non Commercial. No Derivatives. License: Creative Commons - Attribution - Non-Commercial - NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
Be sure to tag @do3d_com on instragram and @do3dpage on facebook when you are posting progress photos! Happy Printing!
Not a MK 39 fan? No worries, we have other models HERE!
Wooooow!!! This is great!!!
Amazing! Thank you guys.
Beautiful work!
thx for sharing !
Awesome But that's not how roman numerals work 😂 its XXXIX , not XXXVIIII
Corrected! Thank you 👍
Nice work.
Finally.... great job bro
Thank you so much..
Thank you for sharing !
i wasn't into iron man ..but i am now ...thank you..amazing work
Thank you so much
Thank you so much!!!!
Thank you so much guys... really great job!!!
...and i have two questions...
How tall is the full suit?... (i have to ask because i'm 198 cm tall) so i know how much do i need to scale...
And is the helmet already scaled for 10%?... (just to make sure) because i don't want to lose the proportion (and get bubble-head)...
Respect!
Awesome guys, I'm already printing a textured forearm, this will be one hell of a suit and project, definitely be doing this on my YouTube channel, Oracles Cave, much appreciated and I will be sure to let my viewers know all about this site.
What are you printing it on and what type of filament?
@steaven.edmonson
I'm just starting off with the last of the PLA I have, then doing the TPU parts at the elbow, then I will be going on to PLA PLUS, for the rest of the build.
Doing it all on my Artillery sidewinder x1, awesome machine, miles better than my cr10s V2, faster, silent, hard to get prints off the bed it sticks do well, no wires all over the place and no extra control box, and its 24 volt, 60 degrees hot in 40 seconds
thanks I have a couple of other prints ahead of this one, Mando and Dr fate, then I am going to start on this. Any suggestions (other than buying a different machine) to print TPU on a CR10s Pro V2? I have the BL touch and all metal hotend ( Micro Swiss)
I think it's the TEFLON tube and the full boden tube that cause issues when the retraction backs the filament up, that's the biggest problem, I think people have hacks using straws as a boden tube and other mods and hacks for doing it, the machine is capable of doing it, just has that backing up issue to get round.
My machine has a Direct Drive extruder so it is perfect for TPU and a volcano hotend, that's why I can print so fast.
Solbe the backing up issue and you have nailed it
thanks for the info, will be looking forward to seeing how you build this on your youtube page.
I usually 3d print all sorts of guns and modify them but YouTube just keeps demonetizing me, it's a shame because my 3d printing videos do really well.
This time I might get monetized for doing a suit, my channel costs loads and I barely make a penny. 3 years I have been grinding at it.
Hopefully the suit will bring in some new viewers, or even filament sponsors, I have already used 2 rolls and I'm on my third and only completed 1 and a half prints lol, its HUGE
Thank you!
Here is @ORACLES CAVE's YouTube Channel. https://www.youtube.com/channel/UCAXN0JmA5U-fIRBpp-2iM-Q
First episode
Very nice! Thank you for making this available. Is lowe body going to be available later? 😜
Yes in about 2 weeks time
The link is not working
nevermind it works thanks guys this is the best Iron man suit of them all
how did youdoit