Does anyone know where to get or how to create an STL for the wheeler mask from return to oz? I now the originals were probably leather of some sort but just after the face part.

Searching through the post juts trying to find answers is a daunting task as every single comment/question is overrun with SPAM....its a bit ridiculous.

I am having a heck of a time getting the helmet to open all the way. When I remove the helper arms the face opens right up but the helper arms are restricting the movement. I have printed everything at 100%. what am I missing.

i got a couple of your free files a few days ago and when i load them into bambu slicer it causes the slicer to close after it said a unhandled exception has occured, just wondering if anyone else had this issue.

noticing files i purchased have expired downlaod links, how do i fix this?

Hello everyone! I'm working on the Flash Movie suit build specifically with the boots shin/calf pieces and the helmet/neck pieces and I'm trying to determine the best sizing for the magnets to be used for it. I tried some 5x2mm ones, but they're too small to hold up the jaw to the helmet. Any ideas

I know the 4 pcs of thee chest is one piec but are the 4 pcs under all glued and screwed together? if not how do they go what floats and what gets connected? tia

Is there a membership/patreon that is run that will give access to a number of STL Print files? Would happily pay a higher fee to have access to multiple files to continue supporting and building the projects up! Love all the items and I am finding it so hard which files to buy and what projects to

Hello i just bought the deadpool file and when i try opening up with my bambulab slicer it just freezes and forces application to close i have done this with both deadpool and with the tchaka helmet. My app is up to date im using a recent core 17 intell with geforce rtx what can i do to fix

Hello all, I went to download a few 3d models i bought a while ago as i remembered i never downloaded them and noticed forbidden when attempting to use the download link in the email. I checked under my orders as well and noticed the link is expired. is there any way i can download these?

Hi all, I finished my marathon of watching marvel not too long ago and suddenly I was wondering which version of MARK is the strongest?

For the Bonnie mask, does it sit on your head and you are to look out its mouth. I printed it at 100% and it is to small to fit my son head if you are going to look out the eyes. BKB

Wondering if anyone would know how much filament is needed to print the god of stories horns.

How do you feel about large sports bags? Are they necessary? I think how convenient and practical they are for their daily use

hey peeps i have purchased and printed the deadpool helmet, im about to print the mesh for the eyes but i noticed there is not a file for mesh 1 to match eyes 1 L+R is there not meant to be mesh in those eyes or is there another file that matches ? thanks kevin

I'm trying to download the mk 39 full body armor but every time i click download it takes me to a page with two links the top one never works and the bottom on takes me to a terms of use page. I have finished the terms of use but it doesn't send me an email

why are the wearable pieces so small? I need to increase the size of everything by 20% for it to fit my average men's medium body. The parts are then way too big to print with my home printer causing me to spend more money having a company print it for me. Why are there no versions that the parts ar

So i bought your model for Broken Mjolmir. I wanted to printed for my little brother. But before printing it i checked the model and i found a few issues. I contacted you support, but they told me that they are not going to do anything about it and i am on my own. So lets see if there is a good soul

Hello. I am relatively new to 3D printing & am liking the whole helmet / armor / props stuff. I bought the above batman helmet and printed the main portion just fine @ 108% (big head lol) but when I import the rear portion and scale it to the same percentage it wont fit in my build volume because

I have just purchased the scout trooper helmet. In the pictures it shows it in parts, and hinged. I have purchased from you before and always had multiple STL FILES that makes up the print. This has come as one, and just points you to what to use to cut it. This is not something I have done before,

I completed the google form yesterday and all I get when I hit download is the pdf again and again I've attempted "buying it" again and its the same problem D:

Hi just wondered if there was 3d model of a wearable cyberman costume

Hello! I'm trying to motorize the MK85 version 2 helmet with the pre configured hinges etc. but for some reason the mask does not want to move with this setup as like the hinges are too short/long. Does anyone else have this issue?

The socketts for the hinges where the arrows are pointing are blocked, preventing motorization. it must be a mistake, since all the parts for motorization are in the file. hey boys at Do3d, could please correct that? I tried myself, but if i convert the watertight .stl to a workable format for light

Hello, so I bought the Mark III V2 Full Body Suit stls and I'm looking at the files and notice there's no exoskeleton for the left calf only the right calf. Am I missing a file or doing something wrong if so please let me know asap, thanks.

Hey all. So I have download the new mark85 helmet design that now have the arms for motorizing the faceplate. Does anyone known if there are any instructions videos etc. I have motorized another helmet using the crashworks design but would like to try this one out. Thanks!

I have been learning how to create 3D Models recently and I've gotten used to it. Does anyone have any tips on how to create 3D models of armor?